REMOVAL & INSTALLATION OF WATER RELAY


Water Relay: A23-000
Retail Price: $25.95

(Tools needed: Wire Cutters, Needle Nose Pliers, Phillips Screwdriver, Extracting Forcep )

REMOVAL

1. REMOVE the 4 SCREWS holding the delivery system to the wooden top.

2. REMOVE 1 TUBING at a time from the water relay. Please be careful not to mix them up.

3. REMOVE the TUBINGS by PULLING AND TWISTING on the WHITE SLEEVE CLAMP.

INSTALLATION

1. SLIDE a WHITE SLEEVE CLAMP UP the TUBING, then SLIDE the WHITE CLAMP
DOWN OVER THE barb and tubing.

2. REPEAT this for each TUBING.

3. TEST UNIT.

REMOUNT delivery system.